Difference Between PVD and DLC Coatings for Knife Blade Surfaces
Introduction
PVD and DLC may seem like two different names, but in fact, they both refer to the same surface strengthening treatment process. This process involves coating the outer layer of blade parts to give them a variety of colors, while also significantly improving the surface hardness, strength and wear resistance of the watch case, thereby improving the durability of the blade.
PVD Physical Vapor Deposition
PVD is the abbreviation for Physical Vapor Deposition.
PVD coating process:
PVD is a modern electroplating technology. During electroplating, the components are placed on a special electroplating electrode, and the gas discharge is used to ionize the material used for coating. After being accelerated by the electric field, the material used for coating will be vaporized.
At this time, the vaporized material and the reaction products generated during the ionization process will all be deposited and attached to the surface of the component to be coated, eventually forming a coating protection layer. The whole process is carried out in a vacuum sealed chamber, so there is almost no environmental pollution problem.
Advantages of PVD:
- Almost no harmful substances that pollute the environment are generated during the electroplating process.
- The color of the finished product can be maintained for a long time without being affected by sunlight and other factors.
- Enhance the corrosion resistance of the electroplated parts;
- There are many kinds of PVD coating colors, not just a single black, but also a variety of colors such as gold, blue and black.
Disadvantages of PVD:
- If the surface of the PVD coating is scratched or hit by an object of extremely high hardness, the metal substrate underneath may still be exposed.
- Increase product production costs and increase consumer spending on products.
DLC Diamond-Like Carbon Coating
DLC is the abbreviation for Diamond-Like Carbon.
DLC is not a special electroplating technology, it is actually one of the many coating materials used in the PVD electroplating process.
The PVD electroplating process can use many kinds of coating materials. Common materials include TiAlN, AlTiN, TiB2, DLC, etc. In the current PVD process, DLC is the strongest and most expensive coating material.
DLC material:
It is a non-crystalline carbon element between diamond (with a three-dimensional structure) and graphite (with a flat mesh structure). DLC has the advantages of high hardness, high elastic modulus, high chemical inertness and extremely low friction coefficient.
Using DLC can significantly improve the protection of the coated parts. A thin electroplated coating can achieve a hardness effect close to that of diamond.
Because the coating material contains carbon, the color of DLC is mainly black, the color is relatively monotonous, and the production cost is higher than that of PVD coating using ordinary coating materials.
Hardness of PVD &DLC coating
When PVD chooses ordinary coating material (non-DLC coating), the hardness (HV) range is usually between 2000 and 4200.
When PVD uses DLC material, the hardness (HV) can reach 10000, which is about 2.3 to 5 times that of ordinary PVD coating.
Disadvantages of DLC
- The price of DLC is much higher than that of ordinary PVD, and it is only applicable to high-quality tools. The cost of DLC coating for medium-sized blades is about 10 US dollars.
- DLC rework is extremely difficult. Due to its high surface hardness and high wear resistance, it becomes extremely difficult to remove the DLC coating and re-manufacture it when defects occur during production.
- DLC is similar looking with normal PVD black, so if no rich experience, need detecting instrument to determine it is true DLC or fake one.
UREN Knife Capable of:
Uren knife can provide both normal PVD and DLC surface treatments on knife blades.
We do DLC surface treatment in Dongguan or Shenzhen city. DLC is widely used in the watch industry, and Dongguan and Shenzhen have a long history of watchmaking.

Leave a Reply
Want to join the discussion?Feel free to contribute!